CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
RING CENTRAL CONFIGURATION GUIDE: V3 PAGING SERVER
Doc. 931042C Page 22
Note: These example values are published only for reference. The SIPAuthPassword
value should be the actual value from the Assisted Generic IP Phone Provisioning
popup window.
Verify the Paging Extension is Registered
After the paging server has rebooted and initialized, refresh the Home page of the web interface.
Your device should show as [Registered with SIP Server] in green text on the bottom of the
Home Page of the web interface as well as at the top of the SIP Configuration page next to
Enable SIP Operation. See Figure 5-11 and Figure 5-12.
Additionally, you may verify the paging extension is registered with RingCentral through the
admin portal. From the Phones & Devices menu, select User Phones and the IP Phone you just
created for the paging extension. The status should show as “online” in the Device Details.
Figure 5-14. Device Details – Status
Make a Test Call
Once your paging extension has registered with RingCentral, you may use any RingCentral
phone to dial the paging extension.
To Next Page
Loading...