CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
RING CENTRAL CONFIGURATION GUIDE: V3 PAGING SERVER
Doc. 931042C Page 29
Verify the Nightringer is Registered
After the paging server has rebooted and initialized, refresh the Home page of the web interface.
Your device should show as [Registered with SIP Server] in green text on the bottom of the
Home Page of the web interface as well as at the top of the Nightringer Configuration page next
to Enable Nightringer. See Figure 6-2 and Figure 6-3.
Additionally, you may verify the Nightringer is registered with RingCentral through the admin
portal. From the Phones & Devices menu, select User Phones and the IP Phone you just
created for the Nightringer. The status should show as “online” in the Phone Details.
Figure 6-5. Nightringer Phone Details – Status
Make a Test Call
Once your device has registered with RingCentral, you may use any RingCentral phone to dial
the Nightringer extension.
To Next Page
Loading...