EasyManuals Logo

CyberPower CSB404 User Manual

CyberPower CSB404
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
CONGRATULATIONS ON YOUR PURCHASE
Thank you for selecting the CyberPower CSB404 Surge Protector.
This manual explains the features and operation of the CSB404.
Please take a few moments to read this manual.
FEATURES
1. ON/OFF Reset Control Switch and Circuit Breaker
Controls power to all outlets. The switch is also a 15 A breaker.
When an overload occurs, it will automatically switch o.
To resume operation, ensure the overload condition is removed
and reset the surge protector by switching the unit ON.
2. Standard Grounded Outlets (4)
SPECIFICATIONS
• Model Number: CSB404
Outlets: 4 Standard Grounded Outlets
• Surge Protection: 450 Joules
• Electrical Rating: 125 V/15 A/1875 W
UL Clamping Voltage: UL 1449 4th/500 V (H-N, H-G, N-G)
• Maximum Peak Current: 22,500 A
3 AC Lines Protected: H-N: 7,500 A, H-G: 7,500 A, N-G: 7,500 A
(The maximum surge possible on household wiring is 6,000 volts)
• Response Time: Less than 1 nanosecond
• Attenuation: Up to 43 dB
• EMI/RFI Filtration: 150 kHz to 100 MHz
• Circuit Breaker: Resettable 15 Amp
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK - Use only in dry
locations and only indoors. DO NOT plug into another relocatable
power tap. DO NOT “daisy chain” surge protectors. DO NOT use
with any aquarium equipment. DO NOT use if properly grounded
outlets are not available. DO NOT install this device if there is less
than 10 meters (30 feet) or more of wire between the electrical
outlet and electrical service panel. DO NOT use for medical or life
support equipment. This device features an internal protection that
will disconnect the surge protective component at the end of its
useful life, but it will maintain unprotected power to the load.
TROUBLESHOOTING
If the ON/OFF is switched OFF, the 15 Amp circuit breaker may
have tripped. Examine your connected equipment and remove
the device that is overloading the circuit. Then, turn the
ON/OFF switch back to RESET.
TECHNICAL SUPPORT
Please contact our Tech Support Department with installation,
troubleshooting, or general product questions.
• Phone: 1-877-297-6937
• Email: tech@cpsww.com
• Hours of Operation:
Monday – Friday 7:00am – 6:00pm CST
USER MANUAL
4-Outlet Surge Protector
CSB404
4-Outlet Surge Protector
CSB404
1
2
Copyright © 2019 Cyber Power Systems (USA), Inc. All rights reserved.
1
RESET
OFF
2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CyberPower CSB404 and is the answer not in the manual?

CyberPower CSB404 Specifications

General IconGeneral
BrandCyberPower
ModelCSB404
CategorySurge Protector
LanguageEnglish

Related product manuals