©2019 Cyber Power Systems (USA), Inc. All rights reserved. All other trademarks are the property of their respective owners.
1
INTRODUCTION
The CyberPower Step-Down and Isolation Transformers support hardwire installations (OL6KSTF/ OL10K-
STF) and are designed for a variety of CyberPower UPS systems. When connected to a UPS, the step-down
transformer converts voltage from 200-240V down to 100-120V.
UNPACKING PROCEDURES
The UPS system is very heavy, please handle with care. Wear safety shoes and use a hydraulic equipment
lift if one is available. At least two people are required for all handling operations, including unpacking,
lifting, and installation in a rack system. Do not use the lifting straps to carry the unit around; they are
provided to manually unpack the unit only.
USE LIFTING STRAPS TO REMOVE UNIT FROM THE BOX.
Information, advice, help
To Next Page
Loading...