Need help?Do you have a question about the CyberPower PDU15SW8RNET and is the answer not in the manual?
General| Model | PDU15SW8RNET |
|---|---|
| PDU Type | Switched |
| Input Frequency | 50/60 Hz |
| Maximum Input Current | 15A |
| Output Receptacles | 8 |
| Outlet Type | NEMA 5-15R |
| Network Management | Yes |
| Network Interface | Ethernet |
| Power Cord Length | 10 ft |
| Form Factor | Rackmount |
| Height | 1.75 in |
| Management | Web |
| Protocols Supported | HTTP, HTTPS, SNMP |
| Operating Temperature | 0 to 40°C |
Explains how to view PDU voltage, current, and IP address on the LCD.
Details how to access and use the CyberPower Management Console for remote control.
Step-by-step guide for mounting the PDU horizontally in a rack.
Instructions for installing the PDU vertically in specific rack systems.
Steps for connecting the PDU to a local network and assigning an IP address.
Overview of PDU system vitals, including voltage, load current, and status messages.
Displays the current power status (On/Off) for each individual PDU outlet.
Allows users to control individual outlets, including turning them on/off or rebooting.
Configures load thresholds, audible alarms, and cold start delay for the PDU.
Sets up schedules for automatic outlet actions (On, Off, Reboot) at specific times.
Displays a chronological list of events with timestamps and descriptions.
Allows selection of event types and SNMP traps to be logged.
Configures network parameters such as IP address, subnet mask, and gateway.
Details the process of assigning a valid IP address to the PDU using the utility.
To Next Page
