Need help?Do you have a question about the CyberPower PDU31 Series and is the answer not in the manual?
General| Model | PDU31 Series |
|---|---|
| Input Voltage | 120V |
| Input Frequency | 50/60 Hz |
| Output Voltage | 120V |
| Output Receptacles | NEMA 5-15R |
| Outlet Type | NEMA 5-15R |
| Input Plug | NEMA 5-15P |
| Surge Protection | Yes |
| Monitoring | No |
| Amperage | 15A |
| Form Factor | Rackmount |
| Mounting Type | Horizontal |
Guides users on accessing the PDU via web browser and logging in.
Covers date, time, daylight saving, identification, and reset configurations.
Configures system date, time, and NTP synchronization.
Sets device name, location, contact, and system reboot/reset options.
Configures temperature and humidity monitoring thresholds and alerts.
Provides real-time monitoring of PDU vitals and status.
Displays load, voltage, frequency, and energy consumption metrics.
Details the on/off status and power usage of each outlet.
Accesses historical data for graphing and energy consumption analysis.
Configures overload thresholds and cold-start behavior for power safety.
Sets up automatic notifications for system events via email, SMS, or syslog.
Configures SMTP server and recipient settings for email alerts.
Sets up SNMP trap receivers for event alerts.
Manages individual outlet power state, scheduling, and sequencing.
Configures outlet parameters, delays, and AutoPing for device monitoring.
Enables Wake on LAN and safe computer shutdown features.
Manages Cisco EnergyWise entities for power control.
Manages user access methods including Local, RADIUS, and LDAP.
Detailed configuration steps for Local, RADIUS, and LDAP authentication.
Configures IP addressing, SNMP protocols, and other network services.
Configures HTTP/HTTPS, Telnet/SSH console, and FTP server access.
Explains accessing the PDU via Telnet, SSH, or serial console.
Provides a reference for essential CLI commands for device management.
Details commands for status, configuration, control, and scheduling of devices/outlets.
Covers commands for IP, SNMP, Syslog, and system settings.
Manages authentication, RADIUS, LDAP, and security protocols via CLI.
Explains how to connect multiple PDUs for centralized monitoring and control.
Covers supported features, limitations, and common issues in daisy-chained setups.
Details various methods for updating the PDU firmware.
Provides step-by-step instructions for firmware updates via different channels.
To Next Page
