Need help?Do you have a question about the CyberPower Outlet Series and is the answer not in the manual?
General| Brand | CyberPower |
|---|---|
| Model | Outlet Series |
| Category | Power distribution unit |
| Language | English |
Identifies the form factors (1U/2U/0U) and types (Switched/Metered/Monitored) of PDUs.
Indicates this document is the user manual for the PDUs.
Lists PDU models by their series and types.
Essential safety guidelines before installing or operating the PDUs.
Details the items included in the package for 1U and 2U PDU models.
Lists the contents of the package for OU PDU models.
Explains the components on the front and rear panels of 1U 15A PDUs.
Details input/output parameters and management features for 1U 15A models.
Provides dimensions, environmental conditions, and safety certifications for 1U 15A models.
Explains the components on the front and rear panels of 1U 20A PDUs.
Details input/output parameters and management features for 1U 20A models.
Provides dimensions, environmental conditions, and safety certifications for 1U 20A models.
Explains the components on the front and rear panels of 2U PDUs.
Details input/output parameters and management features for 2U models.
Provides dimensions, environmental conditions, and safety certifications for 2U models.
Explains front and rear panel components for OU 16/20A PDUs.
Details input/output parameters and management features for OU 16/20A models.
Provides dimensions, environmental conditions, and safety certifications for OU 16/20A models.
Explains front and rear panel components for OU 30/32A PDUs.
Details input/output parameters and management features for OU 30/32A models.
Provides dimensions, environmental conditions, and safety certifications for OU 30/32A models.
Instructions for mounting 1U PDUs horizontally in a rack, including bracket and tray attachment.
Steps for installing 2U PDUs horizontally, including brackets, mounting, and tray attachment.
Steps for installing 1U PDUs vertically, including brackets and mounting.
Steps for installing OU PDUs vertically, including keyhole slots and alternative methods.
Procedures for altering the power cord cover orientation.
Instructions for locking input and output power cords using cable ties.
Checking receptacle compatibility and connecting the PDU to power.
Connecting devices to the PDU outlets and monitoring load.
Connecting the PDU to the network and methods for assigning its IP address.
Using utilities, DHCP, ARP, or Hyper Terminal to set the PDU's IP address.
Managing the PDU through various remote interfaces and protocols.
Using the PDU's LCD screen for monitoring, configuration, and menu navigation.
Interpreting LED states and performing device resets.
Configuring unattended shutdowns and setting up environmental sensors.
Specifies necessary firmware files and important considerations for upgrades.
Using FTP or CyberPower Utility for single or multiple device firmware upgrades.
Steps to upgrade firmware using a USB flash drive via the PDU's LCD.
Diagnosing and resolving common PDU operational problems like no power or overload.
Information on regulatory compliance and warnings.
Specifies COM port settings and menu options for PDU interaction via Hyper Terminal.
How to configure network and system settings using Hyper Terminal.
Introduction to the utility, its installation process, and how to start it.
Steps for scanning, assigning IP, authenticating, and adjusting utility settings.
Supported web features and management protocols for daisy-chained PDUs.
Upgrading guest firmware via host and switching views between PDUs.
Behavior during cable disconnection, power loss, and understanding daisy-chain limits.
To Next Page
