30
Option 3: Use a USB Flash Drive
Use the following steps to upgrade the firmware.
1. Download the latest firmware from
www.cyberpower.com.
2. Extract the file to the root directory of a USB flash drive
with FAT32 format. Please note that the two files below
should be available in order to complete the firmware
upgrade process:
• cpsmpdumadata_xxx.bin
• cpsmpdumafw_xxx.bin
3. Plug the USB drive into the PDU USB port and
press Enter button on the PDU LCD screen to enter
Main Menu. The USB option will be displayed.
4. Select USB and press Enter button to enter Firmware
Upgrade menu.
5. Select Main and Ye s to start the upgrade process.
6. The PDU will reboot after the process is completed.
Note: You can check to see if the firmware upgrade is
successful by checking the “Firmware version” on the
[System->About] screen via web UI.
OPERATION
TROUBLESHOOTING
Firmware Upgrade
Main Menu
Alert
Meter
Control
Sensor
Setting
About
USB
USB
Firmware
Upgrade
Main
Return
USB
Firmware
Upgrade
Processing
Main
Firmware
Upgrade
Confirm?
Yes
No
USB
Firmware
Upgrade
Success
Problem Possible Cause Solution
PDU outlets do not provide power
to connected equipment
1. Breaker tripped
2. Power cord is not properly
plugged in
Reset Breaker, check the plug to insure
its connected correctly. If the problem
remains, contact technical support.
Amperage displayed on LCD screen
exceeds the units capability
Overload
The load indicator shows red when
overload. Reduce the load on the
PDU until the overload is gone. If the
problem remains, contact technical
support.
Circuit breakers have tripped
1. Sustained overload
2. Excessive ambient or internal
temperatures
3. Faulty breaker
Reset Breaker.
If the problem remains, contact
technical support.
To Next Page
Loading...
Need help?
General
