CyberPower PDU31 Series User Manual

77
Web Interface
Intelligent PDU User Guide
Item
Definition
SSH Settings
SSH Port
The TCP/IP port that SSH uses to communicate; 22 is the default value.
Users can change port setting to any unused port from 5000 to 65535 to
enhance security.
Hostkey Status
Display the status of hostkey fingerprint to show whether it is valid or
invalid.
Click Upload Hostkey to upload or change hostkey.
Hostkey
Fingerprint
The hostkey fingerprint uploaded by users will be displayed in this field.

CyberPower PDU31 Series Specifications

General

Brand	CyberPower
Model	PDU31 Series
Category	Power distribution unit
Language	English