CyberPower PDU31 Series User Manual

78
Web Interface
Intelligent PDU User Guide
FTP Service
Allow users to enable/disable the FTP server service and configure the TCP/IP port of the FTP
server. The FTP server is used for upgrading Firmware. See System Tab > Network Service > FTP
Service.
System Tab > Network Service > FTP Service
Item
Definition
Allow Access
Enable FTP server access.
Access Port
The TCP/IP port of the FTP server; 21 is the default value. Users can
change port setting to any unused port from 5000 to 65535 to enhance
security.

CyberPower PDU31 Series Specifications

General

Brand	CyberPower
Model	PDU31 Series
Category	Power distribution unit
Language	English