38
Installing and Removing the Infant Car Seat
Installing with Base Using Lap/Shoulder Belts
10. Put vehicle belt in locked mode (see
vehicle owner's manual for more
information). In most vehicles, you can
switch Shoulder Belt Retractor into
locking mode by pulling out Shoulder
Belt all the way and then letting it rewind
into the retractor. Pull on the belt to make
sure it is locking.
11. Recheck the Recline Angle
to ensure it remains in the
appropriate range for the
child's weight. If not, remove
the Base, adjust the recline
angle, and reinstall.
9 - 15.8 kg
(20 - 35 lbs)
1.8 - 9 kg
(4 - 20 lbs)
Recline Indicator
CY_171_8559_A0821
aa
To Next Page
Loading...
Need help?
General
