To Next PageTo Next Page
Need help?Do you have a question about the CYBEX gold ATON M and is the answer not in the manual?
General| Category | Infant Car Seat |
|---|---|
| Age Range | From birth up to approx. 18 months |
| Canopy | Yes |
| Sun protection | UPF 50+ |
| Removable cover | Yes |
| Machine washable cover | Yes, at 30°C |
| Travel System compatible | Yes |
| Headrest adjustable | Yes |
| Harness type | 5-point harness |
| Group | Group 0+ |
| Safety Standard | ECE R44/04 |
| Safety Features | Energy-absorbing shell |
| Materials | Polyester |
Crucial warnings regarding child restraint placement near vehicle airbags.
Specific weight and height guidelines for safe use of the child restraint.
Labeled diagram identifying all parts of the Safelock Base.
Labeled diagrams showing rear and underside views of the base.
Labeled diagram identifying parts visible from the top of the infant carrier.
Labeled diagram identifying parts visible from the bottom of the infant carrier.
Information on choosing the correct and safe seating position in the vehicle.
Explanation of LATCH system components and its safety.
Step-by-step guide to extending and locking the load leg.
Critical information on proper load leg placement and vehicle floor contact.
Preparing the base and vehicle for LATCH installation.
How to connect the LATCH anchors to the vehicle's lower anchors.
Final steps to ensure the base is securely installed using LATCH.
Preparing the base and vehicle for installation with a lap and shoulder belt.
Correctly routing the vehicle belt through the base and buckling it.
Preparing the base and vehicle for installation using only the lap belt.
Using the lock-off mechanism for a tight and secure lap belt installation.
A comprehensive checklist to ensure the child restraint is correctly installed and used.
