EN
77
4. Turn the male side of the Chest Clip over and loosen screws with a small Phillips screw-
driver. Remove the cover
a
.
5. Remove Circuit Board
b
from Chest Clip. Remove Battery
c
from Circuit Board. Replace
Battery with new BR2032 Lithium button cell Battery, as shown.
6. Place the Circuit Board with the new Battery in the Chest Clip. Replace the Cover and
tighten the screws. This completes the battery replacement process.
If you have questions, please contact CYBEX at: 1-877-242-5676 or online at:
http://cybex-online.com/us/contact.html
4
5
a
b
b
c
USING SENSORSAFE 2.0
To Next Page
Loading...
