CYBEX gold ATON M - Care and Cleaning; Removing the Seat Cover

78
CARE AND CLEANING
WARNING! The infant car seat must never be
used without the cover.
Removing the Seat Cover
The integrated Harness System cannot be
removed from the seat. NEVER remove or
attempt to remove parts of the Harness System.
DO NOT damage, remove or dispose of any EPS
foam.
To remove, please follow these steps:
1. Unfasten the belt buckle.
2. Unsnap the two Shoulder Pads from the
harness.
3. If using the Infant body support, simply
unsnap the two snaps holding it around
the harness straps.
4. Pull the Headrest Cover over the edge.
5. Unsnap the two snaps creating the
harness slot.
SHOULDER
PADS
BACKREST
COVER
HEADREST
COVER
INFANT BODY
SUPPORT