EN
79
CARE AND CLEANING
6. Unsnap the two black snaps holding the
canopy fabric and push canopy forward.
7. Pull seat pad forward and over the side wings,
remove from around the travel system release
buttons.
8. Remove seat fabric from around the harness
adjustment button and push crotch buckle
retainer up through the bottom of the seat.
9. Pull seat pad o of carrier.
DO NOT damage, remove or dispose of any
EPS foam.
Installing the Seat Cover
NOTE! Ensure to not twist or mix up the
shoulder belts.
To reinstall the Seat Cover, reverse the Steps on
page 78-79.
To Next Page
Loading...
