74
1. INSTALL THE SENSORSAFE 2.0 RECEIVER.
Locate the 16PIN OBDII port
a
in your vehicle. Refer to your vehicle owner’s manual for
location. Plug in the SensorSafe 2.0 Receiver.
2. POWER UP THE VEHICLE.
If unable to locate your vehicle manual, the SensorSafe 2.0
Application may contain information regarding the location
of the 16PIN OBDII port for your vehicle
Your SensorSafe 2.0 Receiver will sound one prolonged
tone when it first communicates with the vehicle network.
In some vehicles this occurs immediately after installing
the SensorSafe 2.0 Receiver, in other vehicles the tone will
not be heard until the vehicle has been started.
This initialization signal only occurs one time after installa-
tion.
a
USING SENSORSAFE 2.0
To Next Page
Loading...
