• Announce Races (Smart Link mode): When someone else is starting a group race,
should it be announced on this cycle if the cycle isn't being used? Choose Yes or No.
See Chapter 4 for information on group races.
• Upload status (CSAFE mode): Toggles upload status on and off.
• Key Beep: Should the console keys beep when pressed? Choose Yes or No
• Smartlink or CSAFE: choose the desired communications mode.
3. When you're done setting options, press the Clear key twice to save your settings
and leave setup mode.
If you decide not to change the settings, stop pedaling and let the console turn off
without leaving setup mode. All settings keep their previous values.
Cybex 700C Cycle and 700R Recumbent Owner’s Manual
Page 2-10
To Next Page
Loading...
Need help?
General
