Operation
Page 3–8
Cybex 750C/750R Owner’s Manual
A2 – Isokinetic Program Setup
1. Press ADVANCED programs key.
2. Scroll to (or key in) #2.
3. Select time.
4. Use LEVEL control keys + - to adjust Revolutions per Minute (RPM). Choices are
15 - 150 in increments of fi ve.
5. Adjust level for scale when “LEVEL XX” and “DISPLAY SCALE YY - ZZZ” appear in the Text
Area.
6. Enter user’s accurate weight.
A3 – Fitness Test Setup
1. Press ADVANCED programs key.
2. Scroll to (or key in) #3.
3. Using the number keypad, key in user’s accurate age when Text Area prompts “ENTER YOUR
AGE TO CALCULATE TARGET HEART RATE”. Valid age range is 13 – 113.
4. Enter user’s accurate weight.
5. When the Text Area prompts “CHOOSE MALE/FEMALE”, use the LEVEL + - keys to choose
male or female. Default is set to male.
Before the Fitness Test can run, confi rmation and display of a valid heart rate is required.
If no valid heart rate signal is present, the Text Area will scroll “ACQUIRING VALID HEART RATE
SIGNAL”. If no valid heart rate is acquired, a beep will sound and the unit will reset to Count Down.
If a valid heart rate is present, the unit will move forward to start the Fitness Test. If user’s heart rate is
above 100 BPM, the unit will display the message “THE FITNESS TEST IS ONLY VALID IF STARTING
FROM A STATE OF REST”.
To Next Page
Loading...
Need help?
General
