CYBEX 771A - Install Handrails

2. Install the accessory tray bottom to the accessory tray base with three screws using a Phillips
screwdriver.
QtyDescription
1Accessory tray bottom1
1Accessory tray base2
3Screws3
Install handrails
1. Remove three locknuts from the left support leg using two 9/16" open end wrenches. Keep the two
spacers in place.
QtyDescription
3Locknuts1
2Spacers2
1Left handle3
2. Install the left handle and three locknuts using two 9/16" open end wrenches.
Page 21 of 95
Cybex 771A/771AT, 772A/772AT Arc Trainer Part Number 5771-4 K