EasyManuals Logo

CYBEX ATON BASE 2 User Manual

CYBEX ATON BASE 2
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
DEUKIT
Now lower the foot end of the ATON infant carrier until the
second locking bar (z) engages with the locking hooks (o),
audible with a CLICK.
Ensure that the indicator device button (x) on the unlock key (j)
is clearly visible. Pull on the carrying handle (a) to verify a proper
installation.
REMOVING OF THE ATON
Push the indicator device button (x) to release the unlock key (j).
Simultaneously press the unlock key (j) and tilt the infant carrier
slightly forward until the locking bar (z) disengages from the
locking hooks (o) on the food end side.
Now ATON can be comfortably lifted out of the base.
REMOVING THE ATON BASE 2
Warning! The whole system is under pressure. Always open
the seat belt buckle (q) rst before you try to release the lock
mechanism (v).
Unfasten the vehicle seat buckle (q).
Disengage the lock mechanism (v) at the fastening device (w).
Fold the fastening device (w) up to the maximum position and
take the vehicle seat belt out of the belt guide.
Abbassare ora il lato piedi del seggiolino dove è posta la
seconda barra di ssaggio (z) che deve agganciarsi agli appositi
ganci di bloccaggio (o) con un sonoro „click“.
Assicuratevi che l‘indicatore di corretto ancoraggio (x) sulla
maniglia di sblocco (j) sia ben visibile. Vericare la corretta
installazione sollevando il manico di trasporto (a).
SGANCIARE IL SEGGIOLINO DALLA BASE
Premere il pulsante indicatore di corretto ancoraggio (x) per
sbloccare la chiave di rilascio (j).
Premere la chiave di rilascio (j) e contemporaneamente inclinare
leggermente in avanti il seggiolino no a staccare la barra (z)
dagli agganci (o) dal lato piedi.
Ora è possibile sollevare agevolmente l‘ATON dalla sua BASE.
RIMOZIONE DELLA ATON BASE 2
Attenzione! Il sistema è in tensione. Slacciare sempre la
cintura dalla bbia (q) prima di rilasciare il meccanismo di
ancoraggio (v).
Sganciare la cintura di sicurezza dalla bbia (q).
Disinnestare il meccanismo di blocco (v) sul dispositivo di
ancoraggio (w).
Piegare il dispositivo di ancoraggio (w) no al fermo e togliere la
cintura dalla guida.
21

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CYBEX ATON BASE 2 and is the answer not in the manual?

CYBEX ATON BASE 2 Specifications

General IconGeneral
BrandCYBEX
ModelATON BASE 2
CategoryCar Seat
LanguageEnglish

Related product manuals