CYBEX ATON 2 User Manual

CYBEX Industrial Limited
Suite 1222, 12/F | Leighton Centre | 77 Leighton Road | Causeway Bay | Hong Kong
www.cybex-online.com
Distributed in the United States by Columbus Trading-Partners USA Inc.
1801 Commerce Drive | Piqua, Ohio 45356, USA
Tel: 18772425676 | e-mail: support.americas@goodbabyint.com | www.cybex-online.com
© 2019 CYBEX Industrial Limited All rights reserved. Printed in China.
This product and its components are subject to change without notice. Patents pending.
© 2019 CYBEX Industrial Limited All rights reserved. Printed in China.
This product and its components are subject to change without notice. Patents pending.
CY_171_5980-A0319

CYBEX ATON 2 Specifications

General

Height Capacity	Up to 32 inches
Base Included	Yes
Side Impact Protection	Yes
Recline Positions	Multiple
Harness Type	5-point harness
Removable Cover	Yes, machine washable
Weight Capacity	4-35 lbs
Installation Type	LATCH, Seat Belt
Safety Standards	FMVSS 213
Installation	LATCH system or seat belt
Base Compatibility	Compatible with CYBEX Aton Base 2
Stroller Compatibility	Compatible with CYBEX strollers
Additional Features	Linear Side-impact Protection (L.S.P. System)

Summary

Welcome to CYBEX!

Front Impact Protection

Explains how the Load Leg minimizes crash forces in frontal impacts.

Linear Side Impact Protection (LSP)

Describes how side protectors absorb and channel crash forces away from the baby.

Overview of the Aton 2 Infant Carrier

Overview of the Aton 2 Base

Unique Features of the Aton 2

Linear Side-impact Protection (LSP)

Load Leg

Minimizes crash forces in frontal impacts by directing them to the vehicle floor.

Super Easy And Tight Installation

Child Size Requirements

Rear Facing is Safest

Recommends keeping children rear-facing until at least age two or outgrowing seat limits.

Using the Infant Carrier

Harness Buckle

Chest Clip

One Handed Harness Adjustment

Vehicle Seat Location Requirements

Using LATCH

Outer Seating Positions

Using the Load Leg

Adjusting the Recline Angle Using the Base

Installing the Base using LATCH

Installing the Base Using a Lap and Shoulder Belt

Installing the Base Using a Lap Belt Only

Using the Infant Carrier with the Base

Attaching Infant Carrier to Base

Step-by-step instructions for securely attaching the carrier to the base.

Releasing Infant Carrier from Base

How to safely detach the infant carrier from the base.

Using the Linear Side-impact Protection (LSP)

Installing the Infant Carrier without the Base using a Lap and Shoulder Belt

Installing the Infant Carrier without the Base using a Lap Belt Only

Adjusting the Recline Angle without the Base

Using the Infant Carrier on Aircraft

Safety Checklist

Safe Car Practices

General guidelines for safe driving and child passenger safety.

Using SensorSafe

Install SensorSafe Receiver

Resources

Crash Safety Guidelines

Warning against using the restraint if it has been in a crash due to hidden damage.