CYBEX ATON 2 User Manual

Harness Buckle
To release Buckle Tongues, firmly press the RED button on the Harness Buckle
and pull the tongues out.
To fasten, insert each Tongue into Buckle, listening for an audible .
Pull on each to verify a secure connection.
Check that the Buckle functions properly and is kept free of dirt and
debris. For cleaning, see page 45.
Chest Clip
To separate Chest Clip, squeeze top and bottom tabs and pull apart. To fasten,
slide the two parts together until an audible is heard.
Always position the center of the Chest Clip even with the child's armpits.
One Handed Harness Adjustment
Loosen Harness by firmly pressing down the Harness Adjustment Button
a
while pulling forward on both straps
b
at shoulder level.
Pull the Adjuster Strap
c
to tighten the Shoulder Straps.
16
c
a
b
Using the Infant Carrier

CYBEX ATON 2 Specifications

General

Height Capacity	Up to 32 inches
Base Included	Yes
Side Impact Protection	Yes
Recline Positions	Multiple
Harness Type	5-point harness
Removable Cover	Yes, machine washable
Weight Capacity	4-35 lbs
Installation Type	LATCH, Seat Belt
Safety Standards	FMVSS 213
Installation	LATCH system or seat belt
Base Compatibility	Compatible with CYBEX Aton Base 2
Stroller Compatibility	Compatible with CYBEX strollers
Additional Features	Linear Side-impact Protection (L.S.P. System)