CYBEX ATON 2 User Manual

ALWAYS USE the LSP device when the Infant Carrier is installed in an outer
seating position, either WITH OR WITHOUT the Base.
To Raise
Lift the LSP device on the side of the Aton adjacent to the vehicle door or
panel.
To Lower
Squeeze the two buttons
a
underneath the LSP device, while folding it
down.
b
WARNING!
DEATH or SERIOUS
INJURY can occur
• ALWAYS USE an LSP device on the side of the child restraint immediately
adjacent to a vehicle door or panel.
• NEVER RAISE an LSP device toward a passenger or another child
restraint.
• NEVER LIFT the child restraint using the LSP device.
39
a
b
Using the Linear Side-impact Protection (LSP)
English

CYBEX ATON 2 Specifications

General

Height Capacity	Up to 32 inches
Base Included	Yes
Side Impact Protection	Yes
Recline Positions	Multiple
Harness Type	5-point harness
Removable Cover	Yes, machine washable
Weight Capacity	4-35 lbs
Installation Type	LATCH, Seat Belt
Safety Standards	FMVSS 213
Installation	LATCH system or seat belt
Base Compatibility	Compatible with CYBEX Aton Base 2
Stroller Compatibility	Compatible with CYBEX strollers
Additional Features	Linear Side-impact Protection (L.S.P. System)