Important Usage Information
• The SensorSafe system consists of two components:
1) The Chest Clip Transmitter and
2) The Receiver Plug. The system will not work unless both of these
components are present in the vehicle with the Receiver installed in the
vehicle’s OBDII port. See page 52.
Secure your child into the child restraint as you would normally.
The SensorSafe Receiver Plug monitors both the Chest Clip Transmitter and
the vehicle. When you arrive at your destination and turn your vehicle off, the
SensorSafe system sounds a series of gentle tones reminding you that your
baby is in the vehicle.
Install it once and SensorSafe is always ready to alert you.
• This system works with the SensorSafe Application which can be
downloaded from:
The App Store® or Google Play™.**
** Trademarks are the property of their respective owners.
Chest Clip Transmitter
Receiver Plug
General Information About Sensorsafe
• The SensorSafe Chest Clip is designed to go into a sleep mode after
being clipped for 12 hours. Although 12-hour vehicle trips without stops
are uncommon and not recommended, the Chest Clip must be opened
and closed after 12 hours to reactivate the SensorSafe system.
PLACE AT ARMPIT LEVEL
SENSOR
SAFE
WARNING!: To avoid DEATH or SERIOUS INJURY, this product contains
magnets. Before use, consult your family doctor about the compatibility
of this product with pacemakers and similar devices..
48
To Next Page
Loading...
Need help?
General
