CYBEX BRAVO 8840 - Securely Anchoring Equipment; Anchoring Responsibility and Fastener Requirements; Shimming Uneven Surfaces

18
Cybex Bravo 8830/8840 Owner’s Manual
Securelyanchormachinetotheoor
To maximize stability, equipment must be secured to a solid level surface.
• Cybex is not responsible for the actual anchoring of equipment. Consult with a professional
contractor.
• Use fasteners having a minimum of 500 lbs. tensile capacity (3/8’’ grade 2 bolts or better).
• If legs/frame does not contact surface, DO NOT pull down with anchors. Shim any leg or
framenotincontactwithsurfaceusingatwashers.