10
Cybex FT-325 Owner’s Manual
Assembly
Machine Specifications
Total Weight and Size:
752 lbs. inches - 58.88 W x 37.20 L x 83.42 H
55 kg cm - 149.55 cm W x 94.49 cm L x 211.89 cm H
Tools Required
9/16” Wrench•
7/32” Allen wrench•
3/4” Socket•
Hammer•
3/16” Pin punch•
Loctite• ® #242®
Two people will be required for this procedure. It is the responsibility of the facility owner/owner of the
equipment to ensure that there is appropriate clearance around each machine to allow for safe use
and passage.
Assembly Procedure
Read and understand all instructions thoroughly before assembling this unit.
Verify parts list shown below.
Qty Part Number Description Diagram
4
16010-311
Foot pad
1
4800-557
Decal (10-150)
1
4800-433
Rope Handle
To Next Page
Loading...
