Need help?Do you have a question about the CYBEX Plate Loaded 16120 Smith Press and is the answer not in the manual?
General| Product Code | 16120 |
|---|---|
| Type | Smith Press |
| Category | Plate Loaded |
| Brand | CYBEX |
| Model | 16120 |
| Frame Material | Steel |
| Finish | Powder Coated |
| Safety Features | Adjustable safety stops |
| Bar Weight | 24 lbs (11 kg) |
Cybex International partners with equipment owners to establish the safest and most effective setup of Cybex equipment. Cybex International urges each facility owner to carefully follow all safety precautions.
Do not use machine until it is properly anchored. The machine has holes in the feet, which allow for ease in anchoring to the floor.
Use equipment only as described in the manual or on the placards located on each machine. Failing to follow proper instructions may result in injury.
Warning decals indicate a potentially hazardous situation that could result in death or serious injury if precautions are not observed. Caution decals indicate similar hazards.
Diagrams illustrating the location of warning and caution decals on the equipment.
List of tools needed for assembly, including socket wrench, Allen wrench, and torque wrench.
Information on the total weight and dimensions of the 16120 Smith Press.
Instructions on how to hold frames, place foot pads, and align/secure front and back frame mounts.
Steps to place the weight bar on the frame, secure it, and attach the bearing housing to the weight bar bracket.
Procedure for attaching cable ends to the weight bar bracket using HHCS and loctite.
Instructions and warnings regarding anchoring the machine to the floor using anchor holes and appropriate fasteners.
The intended commercial use of this machine is to aid exercise and improve general physical fitness.
Read and understand all instructions and warnings prior to using this machine in the Safety section of the Owner's Manual.
Steps for adjusting the bar height, bar stops, and loading resistance for exercise.
Guidance on positioning, grasping the bar, lifting/lowering, and locking the bar during exercise.
Guidelines for cleaning upholstery and frames using mild solutions and appropriate cloths.
Tasks for weekly maintenance, including inspecting nuts, bolts, cables, belts, bars, handles, labeling, weight stacks, and guide rods.
Tasks to be performed annually, including replacing cables and belts.
Details on four types of cable tension adjustments: Jam Nut, Rod End, Roll Pin, and Cam End.
Instructions for adjusting loose belts, including loosening set screws, pulling tight, securing, and torquing.
Steps to register the product online via the Cybex website.
Information on how to contact Cybex customer service via phone, fax, or email.
Instructions for ordering replacement parts online or by phone.
Procedure for returning materials for placement, repair, or credit, including obtaining an RMA number.
Information on handling apparent and concealed damage to parts during shipment.
To Next Page