12
Cybex FT-325 Owner’s Manual
If Then
FT-325cannott
through doorway
Remove spiral pin connecting pulley using a hammer and a 3/16” 5.
pin punch
Spiral
pin
Move pulley and cable connection out of the way. 6.
Remove guide rod caps. Guide rod cap contains a compression 7.
spring that will y if grasp is not released slowly. Slide spring loaded
guide rod cap down guide rod until cap is clear of frame. Slowly
release grasp of guide rod cap and remove.
Remove lifting post.8.
Remove weight plates.9.
Remove plastic insert plug, located at top of machine. 10.
Plastic
Insert
plug