7
Cybex Plate Loaded 16120 Smith Press Owner’s Manual
• Inspect all cables and belts for damage or wear. If a cable or belt is worn or damaged, immediately
discontinue use until cable or belt has been replaced.
• Check for worn handles, worn snap links, and worn warning labeling. Replace all worn parts
immediately.
• Inspect for loose or worn grips. Replace all loose or worn grips immediately.
• Inspect weight stacks for proper alignment and operation. Correct all improper alignment and
operation issues immediately.
• Lubricate guide rods using automotive engine oil only.
Yearly
Replace all cables and belts at least annually.
To Next Page
Loading...
