Maintenance Procedures
Maintenance Schedule
AS NEEDEDMONTHLYWEEKLYDAILYACTION
CLEAN
X
Upholstery
XGuide Rods
XShrouds
XHand Grips
WAX
XFrames
INSPECT
XPaint
XCable
XHardware
XFrame
XHand Grips
XShrouds
LUBRICATE
XGuide Rods
Clean
1. Upholstery with an approved or compatible cleaner.
2. Guide Rods with a cotton cloth.
3. Hand Grips with an approved or compatible cleaner.
Wax
Frames with a standard, non-abrasive, wax finish.
Inspect
1. Cables. Look for wear or damage and proper tension. Pay close attention at bends and attachment points.
2. Hardware. Check for loosening. Tighten as required.
3. Frames. Inspect for wear and damage.
4. Handgrips. Check for wear and damage.
5. For paint chips. Fill in immediately with CYBEX INTERNATIONAL INC. touch-up paint.
6. Jam Nut at top of weight stack for tightness.
Page 89 of 94
To Next Page
Loading...
