EasyManuals Logo

CYBEX SOLUTION B2-FIX+ User Manual

CYBEX SOLUTION B2-FIX+
Go to English
130 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
7
ADJUSTING THE HEADREST
The headrest (c) can be adjusted by using the headrest height adjuster (d) at
the back of the headrest (c). Adjust the headrest (c) so that max. 2 cm (approx.
(c).
💡
The height of the headrest can still be adjusted while the seat is installed
in the car.
SECURING THE CHILD
1. Route the vehicle seat belt around your child and insert the belt tongue into
the belt buckle. It must lock into place with an audible "CLICK".
2. Place the lap belt in the red coloured lap belt guides (f) of the child seat.
3. Pull the shoulder belt to tighten the lap belt.
4. On the side of the car seat next to the belt buckle, the shoulder belt and the
lap belt must be inserted together in the lap belt guide (f).
5. Feed the shoulder belt through the shoulder belt guide (g) until it is inside
the belt guide.

(c) to
change the position of the belt.
REMOVING AND REATTACHING THE SEAT COVER
The cover of the child seat consists of three parts (headrest, backrest and
booster). These are held in position at several places by press-studs. Once all
studs have been released, the single parts of the cover can be removed.
In order to put the covers back on the seat, follow the removal instructions in
the reverse order.
💡
The cover may only be washed at 30 °C with a delicate wash program
otherwise it may result in discolouration of the cover fabric. Please wash
the cover separately from other laundry and do not dry in the dryer or in
direct sunlight!
MANUFACTURER’S WARRANTY AND DISPOSAL REGULATIONS
CYBEX GmbH (Riedingerstr. 18, 95448 Bayreuth, Germany) gives you 3
years warranty on this product. The warranty is valid in the country, where
this product was initially sold by a retailer to a customer. The contents of the
warranty and all essential information required for the assertion of the warranty
can be found on our homepage
go.cybex-online.com/manufacturer-warranty-car-seats. If a warranty is
shown in the article description, your legal rights against us for defects remain
󰀨
Please observe the waste disposal regulations in your country.
EN

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CYBEX SOLUTION B2-FIX+ and is the answer not in the manual?

CYBEX SOLUTION B2-FIX+ Specifications

General IconGeneral
CategoryCar Seat
BrandCYBEX
ModelSOLUTION B2-FIX+
Weight GroupGroup 2/3
InstallationISOFIX
Safety StandardECE R44/04
Adjustable HeadrestYes
Side Impact ProtectionYes
Group2/3
Child Height100 - 150 cm
Installation withISOFIX connectors
Recline PositionsNo
Side ProtectionLinear Side-impact Protection
UpholsteryRemovable and washable cover
Age GroupApproximately 3 to 12 years

Related product manuals