Assembly
Machine Specifications
Total Weight and Size VR1 Lat Pull 13130 Standard Stack
Machine Dimensions in UseMachine Dimensions at RestWeight
60” L × 47” W × 89” H60” L × 43” W × 89” H497 Lbs
153 cm L × 226 cm W × 226 cm H153 cm L × 110 cm W × 226 cm H226 Kg
Total Weight and Size VR1 Lat Pull 13130 Light Stack
Machine Dimensions in UseMachine Dimensions at RestWeight
60” L × 47” W × 89” H60” L × 43” W × 89” H427 Lbs
153 cm L × 226 cm W × 226 cm H153 cm L × 110 cm W × 226 cm H194 Kg
Maximum Training WeightMaximum User Weight
227.5 lbs/103 kg300 lbs/135kg
Choosing and Preparing a Site
Before assembling the unit, verify the chosen site meets the following criteria:
• Area is well lit and well ventilated.
• Surface is structurally sound and properly leveled.
• Free area for access to unit and emergency dismount. Minimum clearance is 23.6 inches (0.6 meters).
• Adjacent units may share the free area.
It is the responsibility of the facility owner/owner of the equipment to ensure that there is appropriate clearance
around each machine to allow for safe use and passage.
In compliance with the ADA (American Disabilities Act) there must be clear floor space of at least 30 by 48 inches
and be served by an accessible route for at least one of each type of exercise equipment. If the clear space is
enclosed on three sides (e.g., by walls or the equipment itself), the clear space must be 36 by 48 inches.
Page 8 of 23
To Next Page
Loading...
