Cycleboard ELITE - Folding and Unfolding Handle

Page 6
Note: If the release tab is dicult to press, gently shift the handle forwards and backwards while pressing the release tab.
FOLDING / UNFOLDING HANDLE
The CycleBoard comes with the handle folded down in the shipping box.
TO UNFOLD:
TO FOLD:
Reverse the steps above:
1. Loosen the handle lever by rotating it counter clockwise.
2. Press the release tab downward.
3. Lower the handle until it locks in the lowered position
4. Once the handle locks in the lowered position, tighten the handle lever on the left side by rotating it clockwise until tight
Pick up the CycleBoard by
the handle to lift out of box
Press release tab downward
to raise handle to the upright
position
After handle locks in place,
tighten the handle lever
on the left side by rotating it
clockwise.
Handle Lever
Loosen
Tighten
Release Tab