EasyManua.ls Logo

CYCLOPS PARALYSER 165 - Core System Functions; Disarming the System; Automatic Arming; Engine Immobilisation Mechanism

CYCLOPS PARALYSER 165
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DISARMING
To disarm the P165, simply insert and remove a valid Touchkey from the socket
mounted on your dash. The red status LED will extinguish and the immobiliser is
disarmed. If the engine is not started within 30-40 seconds the P165 will automatically
arm.
ARMING
The P165 will automatically arm within 30-40 seconds after the ignition is turned off.
ENGINE IMMOBILISATION
When the system is armed the engine is immobilised. The two independent, normally
open circuits of immobilisation ensures the engine is starved of either fuel or spark.
Immobilisation points vary from vehicle to vehicle. Common engine kill places
include fuel injection, fuel pump, fuel cut-off solenoids, main ignition feed, low-
tension distributor supplies and starter motor solenoids, etc.

Related product manuals