Need help?Do you have a question about the CYCLOPS PARALYSER 275 and is the answer not in the manual?
To arm or disarm the system, press the button on the remote control. Arming the system is accompanied by two flashes from the indicators and one flash for disarming.
System automatically immobilises the vehicle within 40 seconds after ignition is turned off. Re-arms if disarmed remotely.
System immobilises the engine by starving it of fuel or spark via two independent circuits.
System can be overridden using a Personal Identification Number (PIN) via ignition switch and indicator flashes.
Troubleshooting common issues like unit won't arm/disarm, checking ignition, battery, or using spare remote.
If the LED does not light up, change the remote battery by carefully prying apart the case halves and replacing CR2016 batteries.
Details manufactured by, model number, standards met, supply voltage, and current consumption.
Users are welcome to contact a Cyclops service centre every twelve months for an annual inspection.
Details warranty coverage, conditions for nullification, and costs not covered.
Form to record purchase details, owner information, vehicle details, and installation date.
To Next Page
General