CYCLOPS PARALYSER 375 User Manual

PARALYSER 375
USER INSTRUCTIONS
CYCL PS
R
U
I
C
T
Y
E
S
S
S
Y
S
M
T E
Proudly designed and engineered in
Australia by Dynamco Pty Ltd.

CYCLOPS PARALYSER 375 Specifications

General

Brand	CYCLOPS
Model	PARALYSER 375
Category	Car Alarm
Language	English

Summary

Arming and Disarming Functions

Panic Mode Activation

Activate panic mode by holding the remote's larger button for over two seconds. Indicators flash, siren sounds.

Optional Boot Release

Disarm, then press smaller button to release boot. Requires electrical boot release connection.

Automatic Re-arming

System automatically immobilises vehicle 30-40 seconds after ignition off, then re-arms.

Intrusion Detection and Immobilisation

Engine Immobilisation Mechanism

System immobilises engine when armed by interrupting fuel or spark supply via two circuits.

Glass Breakage Protection

System Options and Settings

Setting System Options

Procedure to set or reset system options using ignition switch and remote control.

Option Configuration by Ignition Turns

Details how many ignition switch turns are needed to achieve desired option changes.

Technical Specifications

Battery Replacement Guide

System Override Procedure

Troubleshooting Common Issues

Annual Inspection Service

Warranty Conditions and Coverage

Warranty Registration Form