Need help?Do you have a question about the CYCLOPS PARALYSER 355 and is the answer not in the manual?
Describes the two rolling code remote controls supplied with the system.
Explains how to arm and disarm the system using the main button on the remote.
Details siren chirps for arming, automatic arming, and disarming operations.
Explains how to suspend siren chirps temporarily or permanently via option #13.
Describes the immobiliser's automatic arming after ignition off and disarming via remote.
Explains the dome light activation upon disarming and its cancellation conditions.
Details how to activate the panic feature by pressing the main button for over 2 seconds.
Describes the warning chirps and indicator flashes for open doors during arming.
Explains the system's two independent circuits of fail-secure immobilisation.
Covers vehicle protection by monitoring doors, bonnet, boot, and glass breakage.
Explains how triggered alarm zones are recorded and indicated upon disarming.
Lists zones (1-4) and their corresponding descriptions for alarm triggers.
Outlines the steps for changing programmable options using ignition switch turns and remote.
A table listing options, ignition switch turns, and their resulting indicator flashes.
Explains specific programmable options like Anti Hijack, programming new remotes, and dome light.
Continues explanations for options 11, 13, 15, 17, and 19.
To Next Page
General