-14-
Option #11** determines whether the 30 seconds of siren output
is constant or pulsed. The constant output suits a connection to
a siren, which allows the siren to sound at full volume. The pulsed
output suits the car horn.
Option #13** Permanently enables or disables the arm/disarm silent
mode. The arm/disarm indicator flashes will occur regardless of
whether this option is enabled/disabled.
Option #15** enables the auto re-lock feature. The doors will
automatically re-lock when the vehicle has been disarmed by remote
control and the doors remain closed for more than 120 seconds. This
prevents accidental disarm.
Option #17*** is used to extend the time length of the central locking
pulses. Vehicles that use a pneumatic central locking system require
about three seconds to allow the pump to charge the air hoses.
Enable this option only to extend the time in these situations.
Option #19 is used to change the values of the Emergency PIN.
** optional feature - will require additional connection(s).
*** do not change - installer setting only (incorrect setting can damage the system, vehicle or central locking)
To Next Page
Loading...