Need help?Do you have a question about the CYCLOPS PARALYSER 385 and is the answer not in the manual?
General| Immobiliser Output | Yes |
|---|---|
| Anti-Hijack Feature | Yes |
| Starter Kill | Yes |
| Compatibility | Universal |
| Voltage | 12V |
Details the function and use of the remote controls supplied with the system.
Explains the procedure for arming and disarming the vehicle alarm system.
Describes the audible feedback provided by the siren upon arming/disarming.
Instructions on how to temporarily suspend audible arm/disarm confirmation chirps.
Explains the system's automatic arming feature and its countdown timer.
Describes how the vehicle's dome light operates upon disarming the system.
Details how to activate the panic feature for car location or emergencies.
Explains the warning given if a door is detected open during arming.
Describes the system's engine immobilisation circuits and their fail-secure design.
Outlines the different zones the alarm system monitors for protection.
Explains how system faults are recorded and indicated via zone numbers.
Procedure for disarming the system using a unique PIN if remotes are lost or stolen.
A table listing programmable options, ignition switch turns, and their settings.
Detailed explanations for various programmable features and their functions.
Continuation of detailed descriptions for programmable options.
Describes how the system controls vehicle door locks upon arming and disarming.
Instructions on using the remote to activate the vehicle's electric boot release.
Explains the anti-hijack feature that locks doors upon ignition on and unlocks upon ignition off.
Details the feature that automatically closes electric windows when the system is armed.
A form for registering the product's warranty details.
To Next Page