CYP AU-IP21 - Telnet Control

6
6
6.5 Telnet Control
To access the telnet control in Windows 7, click on ‘Start’ menu and
type “cmd” in the Search  eld then press enter.
Under Windows XP go to the ‘Start’ menu and click on “Run”, type
“cmd” and press enter.
Under Mac OS X, go to Go
→
Application
→
Utilities
→
Terminal
Once in the command line interface (CLI) type “telnet”, then the IP
address of the unit and hit enter.
Type HELP or
?
to bring out all the commands.