CYP AU-IP21 - Operation Controls and Functions; Front Panel; Rear Panel

2
2
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
CONTROLOPTICAL
POWERIN
RL
OUT
AUDIO CONTROLLER
1 32 4 5
1
IN Button: Short press IN button to switch the audio source. Long
press IN button up to 4 seconds will reset the device to Default
Ethernet Setting. The Power LED will blink 5 times.
2
POWER LED: When power is on, the LED light will illuminate.
3
OPTICAL LED: When source switch to Optical input selection, the
LED light will illuminate. When switch to L/R the LED will unilluminate.
4
CONTROL: This slot is to connect with intranet service line for telnet/
WebGUI control.
5
L/R OUT: These slots are to connect with active speakers or
ampli er’s L/R inputs.
6.2 Rear Panel
SERVICE DC 5V
OPTICAL
IN
R
L
1 3 4
2
1
OPTICAL IN: This slot is to connect with input source’s optical output
port.
2
L/R IN: These slots are to connect with input source’s L/R output
port.
3
SERVICE: This slot is reserved for USB  rmware update use only.
4
DC 5V: Connect the adaptor included in the package and
connect to AC wall outlet for power supply.
CONTROLOPTICAL
POWERIN
RL
OUT
1 32 4 5