3
5. FEATURES
• HDMI 2.0 and DVI 1.0 compliant
• HDCP 1.4 & 2.2 compliant
• 1×HDMI output, 1×VGA output
• Video, audio and control transmission over TCP/IP in Unicast (point-
to-point) or Multicast (single-to-many) modes
• Multi-monitor video wall support with 90° rotation
• HDMI output resolutions up to 4K@30Hz (RGB, 8-bit)
Note: 4K@50/60Hz (YUV 4:2:0) sources are automatically converted to
4K@25/30Hz (RGB) for output
• VGA output resolutions up to WUXGA (RB)
• Supports pass-through of audio formats including LPCM 2.0/5.1/7.1,
and Bitstream over HDMI
Note: The optical output on Receivers can only support LPCM 2.0 &
Bitstream sources.
• The analog Line In on the Transmitter sends audio directly to the
analog Line Out and is inserted into the HDMI output on connected
Receivers
• The Mic In on the Receiver sends audio directly to the analog Line
Out on the Transmitter
• Both Tx and Rx may powered directly by PoE when connected to a
Gigabit Ethernet switch that provides PoE (802.3af)
• Includes 3 LAN ports, allowing multiple Receivers to be daisy
chained without the need for an external Gigabit Ethernet switch
• Supports USB keyboard, mouse and storage extension
• Supports IR and RS-232 bypass
• Unit has an info OSD (when unlinked) and can be controlled via
WebGUI, Telnet, and front panel controls
To Next Page
Loading...
Need help?
General
