To Next Page

To Previous Page

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

1234

Stored

Select HDMI IN

5678

Default

1 2 3 4

LED indicators 1~8: When in Stored or Default mode, each of these

LEDs indicate a dierent EDID setting (1 to 8). Press the 'Select' button

to switch between settings, the LED will illuminate to indicate the

current selected settings. For the default EDID settings, please refer to

section 6.3 - Factory Default EDIDs.

Stored/Bypass:



Select the 'Stored' mode to save up to 8 unique sets of HDMI EDID

settings, please refer to section 6.2 for the learning procedure.



Select the 'Default' mode to use the built-in default EDID settings,

press Select button to choose from 1~8, please refer to section 6.3

for details.

Select:



Press for 3 seconds to switch between the Stored and Default

modes, the LED will illuminate to indicate the selected mode.



Then repeatedly press the 'Select' button to cycle through EDID

settings 1~8.

HDMI IN: Connect to an HDMI source such as a DVD/Blu-ray or PS3.

When the source equipment is connected to a power supply it can

also power the device.

Questions and Answers:

Need help?

Do you have a question about the CYP RE-EDID and is the answer not in the manual?

CYP RE-EDID Specifications

General