Need help?Do you have a question about the Cypress FR MB91F469G and is the answer not in the manual?
Details on connecting the microcontroller to the PC using UART channel 4 and RS232 transceiver.
The easiest programming method using the software with minimal user settings on the 'Automatic' sheet.
The simplest way to use the programmer, requiring selection of the target microcontroller and the hex file.
Details on connecting the microcontroller to the PC using UART channel 4 and RS232 transceiver.
The easiest programming method using the software with minimal user settings on the 'Automatic' sheet.
The simplest way to use the programmer, requiring selection of the target microcontroller and the hex file.
General| Operating Voltage | 2.7 V to 5.5 V |
|---|---|
| Operating Temperature | -40 °C to +85 °C |
| Core | FR81S |
| ADC | 12-bit |
| Timers | 16-bit x 8 |
| Communication Interfaces | UART, CAN, I2C |
To Next Page
