Cypress PSoC - User Manual

To Next Page

PSoC

DEVELOPMENT KIT

QUICK START GUIDE

PSoC Development Board Self Test

Remove the PSoC Development Board from the kit package. Connect the AC power adapter.

After self test, read the success message on the LCD screen. Select an Architecture

• PSoC 1: Insert the “PSoC 1 Software” CD and jump to

step 5.

• PSoC 3/PSoC 5LP: Insert the “PSoC 3/PSoC 5LP

Software” CD and jump to step 6.

For PSoC 1 Development

• View the kit user’s guide.

• Install the PSoC 1 software.

For PSoC 3/PSoC 5LP Development

• View the kit user’s guide.

• Install the PSoC 3/PSoC 5LP software.

Need help?

Do you have a question about the Cypress PSoC and is the answer not in the manual?

Cypress PSoC Specifications

General

CPU Core	ARM Cortex-M0, ARM Cortex-M3, ARM Cortex-M4
Flash Memory	Up to 2 MB
SRAM	Up to 256 KB
Operating Voltage	1.71V to 5.5V
Package Options	QFN, BGA
Digital Peripherals	UART, SPI, I2C, PWM, Timer, Counter
Analog Peripherals	OpAmps, Comparators
Analog-to-Digital Converter (ADC)	Up to 20-bit
Digital-to-Analog Converter (DAC)	Up to 12-bit
Communication Interfaces	USB, CAN, LIN
Operating Temperature	-40°C to +85°C
Operating Frequency	Up to 150 MHz
Programmable Digital Blocks	Available (number varies depending on the specific PSoC device)
Programmable Analog Blocks	Available (number varies depending on the specific PSoC device)