CYRUS CD6s SERVICE CAUTIONS
© Cyrus Audio Ltd Mar 2006 Cyrus CD6s Service Manual Issue 1
These two symbols shown are displayed prominently on the Cyrus CD6s base
cover label. They indicate that the following cautions must be observed by all
personnel-
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER OR BACK.
THERE ARE NO USER SERVICEABLE PARTS INSIDE THE PRODUCT.
ALWAYS REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION! LIVE MAINS VOLTAGES!
When undertaking any work on the CD6s, engineers should observe that exposed live
mains voltages exist on the PCB attached to the mains inlet socket. For safety, this area
must be securely insulated with insulation tape during all repair work.
STATIC PRECAUTIONS
When servicing any Cyrus product, adequate care must be taken during any service work
to observe static precautions, particularly when storing, handling or fitting replacement
components. The following guidelines must be observed –
• Check that all component purchases are delivered in static-safe packaging.
• Store all components in a static-safe environment.
• Always wear a grounding strap and work on a grounded bench when handling
components or servicing a product. Static damage may not be immediately obvious
and may result in a delayed action component/product failure.
To Next Page
Loading...
