CYRUS CD6s TYPE IDENTIFICATION
© Cyrus Audio Ltd Nov 2006 4 Cyrus CD6s Service Manual Issue2
Rating label
Each Cyrus CD6s carries a rating label on the rear panel, which includes details of the
following:
Nominal power voltage
This will be either 230V For use on nominal 220V - 240V AC mains supply.
115V For use on nominal 110V - 120V AC mains supply.
Power consumption
The power consumption figure is indicated under normal working conditions.
Serial number
Each Cyrus CD6s carries a serial number code, which identifies the following-
• Type of product
• Market destination
• Build number
• Paint finish (colour)
The serial number is on the baseplate. It is therefore important to ensure that a baseplate
removed from a product is re-fitted to the same product. In any communications with Cyrus
Service or Quality departments it is essential that the full serial number is quoted so that original
specification parts and service information may be supplied.
PCB Identification
The Cyrus CD6s PCB is marked with a design revision number and this number should be
quoted in all correspondence to the service department when requesting technical advice or
requesting spare parts. The table below shows the PCB markings.
Revision number PCB marking
Main board revision 2 IS101332
To Next Page
Loading...
