I. Disclaimers and Warnings
II. Introduction to TK3 Power Supply System
Warnings
Thank you for purchasing czi products. The contents mentioned herein are
related to your safety, legal rights and responsibilities. Before using this
product, please read this document carefully to ensure that you have set up
the product properly. Failure to follow and comply with the instructions and
warnings in this document may result in injury to you and others, damage to
the product or other surrounding items. This document and all related docu-
ments are subject to the final interpretation of czi. Updates are subject to
change without notice. Please visit the official website at www.czi.com.cn
for the latest product information.
czi TK3 new generation ground power supply system, which further optimiz-
es the size and weight, converts 220V AC into 400V DC high voltage and
transmits it to the UAV through the high-performance nickel alloy power
supply cable to enable the UAV to achieve 24-hour uninterrupted flight.
Combined with the use of UAV matrix lamp, high-power gimbal lamp, gimbal
camera and other mission payloads, it can meet the needs of long-time and
large-area emergency lighting and monitoring in complex emergency
scenarios.
① Please read the Specification carefully before use to make sure that the
TK3 cable is properly connected to the UAV. It’s necessary to fix TK3 cable
on the UAV with rolling strip to prevent the rotating blade from hitting the
TK3 cable.
② The battery power of the UAV shall not be less than 60% when in use,
otherwise the TK3 will charge it, which will short the battery life.
③ Do not turn on the “Power switch” before the UAV takes off, otherwise
the UAV will not be able to take off.
④ Do not fly in rainy days (because the rain will enter the power box along
the cable).
⑤ It’s forbidden to touch TK3 cable (high voltage 400V) with bare hands
at any time so as to prevent accidents. If it’s necessary, please wear
insulating gloves (with high voltage greater than 500V).
45
To Next Page
Loading...