2
SETTING AUTO ADD MODE 17
Total Add Cap
Single Add Cap
Add KH Interval
KH Buffer Concentration
SETTING CUSTOM PLAN MODE 18
Setting The Plan
Add A Plan
Quick Add
Setting The Adjustment Parameters
Range
Method
Adjust Times
Stop Adjusting
CALIBRATING THE KH MANAGER 21
ENTERING THE CALIBRATION SETTINGS 21
CALIBRATING THE PH PROBE 21
CALIBRATING THE SALTWATER PUMP (TANK WATER IN) 22
CALIBRATING THE KH BUFFER SOLUTION PUMP (KH SOLUTION IN) 23
CALIBRATING THE KH TEST PUMP (KH REAGENT IN) 24
CALIBRATING THE KH 25
RESETTING THE CALIBRATION ON THE KH MANAGER 25
MANUALLY RUNNING THE PUMP HEADS 26
RUNNING THE SALTWATER AND KH BUFFER SOLUTION PUMPS 26
RUNNING THE KH TEST REAGENT PUMP AND WASTEWATER PUMP 26
RUNNING THE MAGNETIC STIRRER (STIRRING PUMP) AND ADJUSTING
THE ROTATION SPEED 26
EMPTYING LIQUID FROM THE PUMP HEADS AND TUBES 27
GENERAL SETTINGS 27
RENAMING THE KH MANAGER 27
UPDATING THE KH MANAGER FIRMWARE 27
SETTING THE TIME 27
FACTORY SETTINGS RESET 28
REMOVING THE UNIT FROM YOUR KAMOER REMOTE ACCOUNT 28
To Next Page
Loading...
