Need help?Do you have a question about the D-force DF800N and is the answer not in the manual?
General| Input Voltage | 220-240VAC |
|---|---|
| Maximum Pulling Force | 800N |
| Motor Type | DC Motor |
| Safety Features | obstacle detection |
| Warranty | 2 years |
Explains how to open, close, and stop the door using the remote or wall transmitter.
Details the security feature where transmitters generate new codes for enhanced security.
Describes the system that eliminates manual adjustment of door limit positions.
Explains automatic door reversal upon hitting an obstacle during cycles.
Notes the courtesy light turns on for 2 minutes when the door is activated.
Covers the opener's operation during power outages or lack of mains power.
Describes how to disengage the opener for manual door movement via a string handle.
Steps to prepare the garage door and opener for programming procedures.
Explains the function of each button (P, ↑, ↓, S) and associated LEDs.
Guides on setting the desired fully open position for the garage door.
Guides on setting the desired fully closed position for the garage door.
Details how to set the sensitivity and force for obstruction detection.
Instructions on how to program a remote transmitter to the opener.
Procedures for erasing stored remote transmitter codes from the opener.
Information on external connection terminals and accessories.
Details the location and purpose of the External Connection Terminal.
Instructions for connecting external receivers and wall push buttons.
To Next Page